Mechanics Physics Labware - Mechanics Lab Physics Experiments Kits Vacuum pump, Lab Laboratory Vacuum Pumps Manufacturers Suppliers Exporters India. Schools Laboratories & Educational Labs
It is used to study the motion under the effect of gravity of two mass systems connected through a lightweight cord, one on either side of a simple pulley. This apparatus comprises 2 long metals rods, one rod having a well-balanced 10cm pulley mounted at its one end on near-frictionless bearings and threads at other end for attaching it to the second rod to get a total working length of
This apparatus consists of 1 meter long bar, chrome plated, table clamps, hanger.
Comprising two metal discs, with variable separation, supported on insulating pillars & provided with insulating handles on the ends of the adjustment slide rods, 4 mm sockets too are drilled onto the ends of the rods.
Used in demonstration of Archimedes principle or individual use. Comprising a chrome-plated cylinder with a suspension hook at its one end in close fitting.
In plastic case with circular scale protected by a transparent cover, removable plastic pan, with zero adjustment.
Set of 10 cubes one each of metals brass, lead, iron, copper, aluminum, zinc, and one each of marble, glass, hardwood, softwood.
Wooden cube of size 10cm, made of hard wood, precisely cut and finished, having a total volume of 1dm or 1000cm.
Made of plastic each cube of size 10cm, separated into 10 different 1cm colored layers, comes in a clear plastic container.
Set of six of different metals brass, lead, iron, copper, aluminum and zinc.
For mass-density investigations.
Set of 8 of different cubes, various wood. Supplied in wooden/plastic case.
Made of glass, for demonstration of specific gravity with overflow spout.
Made of tin plate, for demonstration of specific gravity with overflow spout and handle.
Made of tin plate, for demonstration of specific gravity with overflow spout.
Made of brass, for demonstration of specific gravity with overflow spout and handle.
This kit is used to understand the concept of elasticity by students.
To demonstrate displacement of liquids made of plastic with overflow spout.
Comprises a lightweight aluminum track with leveling screws and cushioned stops at either end, pulley fixed towards one end, clamp for vibrator and automatic pen release.
200 mm diameter metal wheel mounted on a balanced horizontal shaft in metal bracket drilled for wall mounting & pointer is fixed to one of the brackets.
To verify the law of composition and resolution of forces.
This apparatus is used to determine G by measuring the time of fall of a steel ball through a pre- determined distance.
It comprises a wooden friction board 480 x 75 x 18 mm, a wooden slider with hook 140 x 70 x 18 mm, a plain aluminum slider and an aluminum slider with rubber backing, an additional long aluminum slider is provided which fits over the friction board to provide an alternative surface type.
Made of Hardwood, 16 pieces, models of various shapes and figures in box.
This apparatus demonstrates that bodies of different density or mass fall through a given distance in the same time in the absence of atmospheric drag.
It consists of a scale mounted vertically on stand, a spring with pointer and provision to hang set of slotted weights.
For determining specific gravity by Archimedes principle, with one pair of long frames and one short frame with a hook underneath for specific gravity experiments. With three pans, adjustable stand and scale, mounted on a wooden base.
For investigating sliding friction. Consists of a plane board hinged at the base at one end with a pulley for the force cord at the other end. A moveable block enables the inclination of the plane to be varied. Complete with 100 x 65mm. Reversible friction slider and 70 x 25mm. Metal roller. Board dimensions: 600 x 75mm., Fitted with graduated arc.
Simple, hardwood comprising, cut-away base to allow cord to hang freely and hinged plane 60 x 7.5 cm. with aluminum pulley 28 mm. diameter, and stepped lower face to accommodate wood block for setting at angles between 24 and 45 deg. Approximately with cylindrical metal roller and scale pan.
It is a class room demonstration kit for qualitative investigation of nature of mass and making students understand distinction between mass and weight.
This kit helps students understand the concept of moments and principle of lever.
Consists of a graduated meter rule with fulcurm, figured 50-0-50cm balanced and fitted into a grooved wooden stand with hangers supplied without weights.
The Linear Air Track is designed for the study of linear motion under practically frictionless conditions.
Made of steel, chrome plated, designed to be used with various slotted masses.
Made of iron, designed to be used with various slotted masses.
series of masses 1 x 1Kg; 1x500gm; 1 x 200 g; 1 x 100 g; 1 x 50 g; 2 x 20 g; 1 x 10 g; 1 x 5 g, 2 x 2 g; 1 x 1 g, also available without hook.
Hexagonal with or without lifting ring.
Slotted Brass Weight Set - Made of brass. This set includes nine slotted masses each of 10 g with a 10 g wire hanger making total mass of 100 g; masses do not fall off when assembled in a set. Tolerance 3%. Also available in 200g, 500g, 1000g.
Made of iron, chrome plated. This set includes nine slotted masses each of 50 g with a 50 g wire hanger making total mass of 500 g; masses do not fall off when assembled in a set. Tolerance 3%. Also available in 1000g
Made of steel. This set includes nine slotted masses each of 50 g with a 50 g wire hanger making total mass of 500 g; masses do not fall off when assembled in a set. Tolerance 3%.
Made of iron, having large hole in center with slot, designed to be used with hangers.
Made of iron, having large hole in center with slot, designed to be used with hangers.
Comprises quite a variety of materials in the form of rectangular blocks.
Hollow brass tube graduated with scale and vernier, fitted with small chunk and mirror, 2 solid and 2 hollow cylinders to perform experiments on rigidity
L shape bracket to fix Maxwell's Vibration Needle on wall.
To verify the relationship between forces action at a point. Comprises board 65 x 50cm, with two aluminum pulleys, 50mm dia, on clamp, for mounting in any position.
This pendulum is used to investigate the relationship between the period of oscillation of a rigid bar pendulum and the distance of its suspension point from its centre of mass
Comprising ungraduated steel bar 1200 x 10 mm with one pair each light and heavy masses, two steel knife edges set in adjustable metal holders and metal support bracket drilled for wall mounting.
Steel spheres with hook for suspension.
Solid lead sphere with a small ring. Dia (a) 13 mm (b) 19 mm (c) 25 mm Pendulum Simple, Steel: PMCH-0050 Brass sphere with a small ring for suspension. Dia (a) 13 mm (b) 19 mm (c) 25 mm Perspex Container: PMCH-0051 To demonstrate density made of plastic.
Brass sphere with a small ring for suspension.
To demonstrate density made of plastic.
Scale to be used in laboratory with zero adjustment . 125KG Max Weight, LCD Screen.
This apparatus demonstrates the independence of horizontal and vertical velocities.
Single 50mm diameter pulley with a groove for cord mounted in universal metal frame for clamping on workbenches or boards in any position.
Single 50mm diameter pulley with a wide groove for whipcord mounted in cast metal frame for clamping on workbenches or boards with the pulley in a vertical plane.
It consists of a 50 mm diameter plastic or aluminum pulley mounted on aluminum frame provided with clamping screw to clamp on the edge of a force board, bench, etc., with axis of rotation being perpendicular to the surface of the board. Max clamp opening 25 mm.
Single 50mm diameter pulley with a wide groove, mounted in cast metal frame and centered, for mounting on workbenches or boards up to 25mm thick.
Pulley fixed in U-shaped bracket for mounting it to benches or boards, on fixed holes with the help of wooden screws.
Single 50mm diameter ball bearing pulley, mounted in aluminum boss provided with a hole and clamping screw to accommodate rod.
It comprises of a 50 mm diameter plastic or aluminum Pulley carried on a metal frame for clamping to the edge of a bench, table etc. with the pulley over-hanging the edge and in vertical plane. Maximum clamp opening 25 mm.
Pulley mounted in U-bracket having a metal rod along the length of pulley for attaching it to a suitable clamp.
Two brass pulleys 38mm and 50mm (Approx.) dia., mounted in brass frame, chrome plated with two hooks.
Two aluminum Pulley 38mm and 50 mm (Approx.) dia., mounted in brass frame with two hooks.
Two Plastic Pulley 38mm and 50mm (Approx.) dia., mounted in aluminum frame, with two hooks.
Two brass pulley wheels 50mm dia., mounted in brass frame, chrome plated with two hooks.
Two aluminum pulley wheels 50 mm dia., mounted in brass frame with two hooks.
Two plastic pulley wheels 50mm dia., mounted in aluminum frame, with two hooks.
Brass pulleys 50mm Dia, mounted in brass frame, chrome plated with two hooks.
aluminum Pulley 50 mm dia, mounted in brass frame with two hooks.
Plastic Pulley 50 mm dia, mounted in brass frame with two hooks.
Three brass pulleys 25mm, 38mm and 50mm (Approx.) Dia, mounted in brass frame, chrome plated with two hooks.
Three aluminum Pulley 25mm, 38mm and 50 mm (Approx.) dia, mounted in brass frame with two hooks.
Three Plastic Pulley 25mm, 38mm and 50mm (Approx.) Dia, mounted in aluminum frame, with two hooks.
Three brass pulley wheels 50mm dia., mounted in brass frame, chrome plated with two hooks.
Three aluminum pulley wheels 50 mm dia., mounted in brass frame with two hooks.
Three plastic pulley wheels 50mm dia, mounted in aluminum frame, with two hooks.
With enamelled metal body; circular enamelled dial 175 mm diameter approx.; tinned pan 230 mm diameter approx.; zero adjuster.
Flat form with hook and brass lacquered scale, after Salter design.
Flat form with zero adjustable device having anodized metal scale, metal parts richly plated in high impact polystyrene body.
Flat form with zero adjustable device having anodised scale, metal parts richly plated in high impact polystyrene body.
Flat form with hook and brass lacquered scale, after Salter design.
Tubular, body made of clear plastic with adjustable zero and top suspension ring and bottom load hook, color coded.
Tubular, body made of clear plastic with adjustable zero and top suspension ring and bottom load hook, color coded.
Round Metal tube, chrome plated with hook.
Round Metal tube, chrome plated with hook.
Metal body, it is provided with suspension ring at top and load hook at bottom. Dial dia 15 cm approx.
Made of 26 S.W.G. wire, closely wound, 6 mm dia approx. loops at both ends.
300mm length and 10mm dia, wire gauage of 19 S.W.G.
An assortment of 150 compression and extension springs ranging from 11 to 300 mm in length, 3 to 22 mm in dia and 27 s.w.g. to 13 s.w.g. in wire thickness. In wooden box.
Carbon paper Discs. Pack of 100.
Ticker tape, width 9.5mm, in rolls approx. 300meter long.
This timer is useful for students to develop basic understanding of constant speed, acceleration and deacceleration.
This timer is useful for students to develop basic understanding of constant speed, acceleration and deacceleration.
Searle's pattern, two cast iron feet each with 3 through holes and grub securing screws.
It consists of a heavy mild steel frame mounted on a heavy trileg cast iron base
For demonstrating the relationship between velocity ratio and number of teeth.
For dynamics experiments using trolleys, wrap resistant wood board, 2450 x 300 x 20 mm thick, reinforced with metal angle side rails.
A pair of identical wooden trolleys 300 mm. long, mounted on three wheels. A spring loaded rod is fitted to give impulse when released.
Hexagonal shape weights with attached rings for lifting, painted.
Consisting of a aluminum wheel of diameter about 110mm and the axle having diameters 50 and 28mm respectively, mounted in a wooden base on adjustable steel cone bearings through a metal shaft passing through its center.
Two grooved wheels of hardwood, dia 150 and 50 mm respectively making a double wheel pivoted on a spindle 10 mm diameter which projects for 100 mm distance.
Simple form but efficient. Consist of a brass scale 10 cms. long and vernier to read 1/10mm with V slides clamps, guides for wire ceiling attachment and tension weight.
It comprises two metal frames connected by a link mechanism carrying a spirit level.
This is to demonstrate the principle of conservation of momentum and showing that momentum is a vector quantity having both magnitude and direction.
Ambala Science Market © all rights reserved